The LEGO models here are inspirational, so have a look around and get your own ideas. NOTICE! PSI do not represent the LEGO Company.
BUILD A RACING CAR
It's easier than you may think at first. This car is made of regular LEGO bricks. The only thing out of the ordinary is the figure; his legs had to be removed to make room for him due to the low construction...
If you still think this car is too difficult, then try to build the Viper underneath:
|
- BUILD A VIPER! -
|
|||
 |
1.
Find a frame and a 2x4 plate.
You can build the car in other colors than these if you like, e.g., black or red.
|
||
 |
2.
First, place the yellow plates and use a grey 1x2 for the engine.
|
||
 |
3.
Now, place the front under the frame.
Then add 2 grey round plates on the engine and a steering wheel.
|
||
 |
4.
Now you can place the fenders.
You can also find a 1x3 plate to fix along the side.
|
||
 |
5.
The rear lights are placed on corner plates placed opposite of each other.
You'll need a red transparent tile, a tap, a 1x1 plate, and a reverse brick. At the front you hide the engine with a 2x3 plate and place an angular plate.
|
||
 |
6.
Place the 2 rear light parts under the frame and place a 2x2 tile upon it.
Make sure it is fastened.
Now, place a roof tile at the front.
|
||
 |
7.
Then it's time for the 'equipment'.
At the back you place a spoiler and a crash bar. Place the doors center. (If you're out of doors in the right color or think it's heavier without doors - then place 2 1x3 bricks instead of the plates). Fasten a grill in front and prepare to make the front lights.
|
||
 |
8.
The lights are constructed from reverse bricks added 1x1 round plates.
|
||
 |
9.
With a windshield the car is almost finished.
|
||
 |
10.
All you need now is wheels and a figure.
(The figure must be without legs due to the low construction). Now, this is a Viper!
|
||
